Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 Vertical drive bevel gears		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

correlejco

United Kingdom
251 Posts
Posted - 04/04/2017 :  10:13:52  Show Profile
I need a lower drive bevel gear (fits to bottom of dynamo with parallel bore).

The top bevel gear works OK but the shaft has been modified by a PO - so I would like an original pattern one if one is available / affordable.

Suitable for P-type or N-type.

John - 1934 NA0492

Peter Green

United Kingdom
1682 Posts
Posted - 04/04/2017 :  11:26:42  Show Profile
John,

What type of dynamo do you have, P or N? the bottom bevel gears are different.

Peter
Go to Top of Page

correlejco

United Kingdom
251 Posts
Posted - 05/04/2017 :  13:19:16  Show Profile
Hello Peter - it's for my NA, Rotax dynamo. I thought that Ns and Ps were the same here - my mistake - John

John - 1934 NA0492
Go to Top of Page

Colin Butchers

United Kingdom
1485 Posts
Posted - 06/04/2017 :  11:05:43  Show Profile
They are very similar but one is slightly deeper than the other. Have you tried the usual suppliers for a new one ? - S&V, Andy King, Rich Hardy etc.

Colin B.
Go to Top of Page

Peter Green

United Kingdom
1682 Posts
Posted - 06/04/2017 :  14:25:46  Show Profile
The main difference is the diameter of the hole for the shaft and the OD scroll. P and N gears are not interchangeable.

Peter
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000