Triple-M Register - Nut with lipseal

Triple-M Register

Username:	Password:
Save Password
Forgot your Password?

All Forums

Triple-M Register Forums

Parts Wanted

Nut with lipseal

Forum Locked

Topic Locked

Printer Friendly

Author

Topic

Otto

Germany
63 Posts

Posted - 30/05/2017 : 07:51:09

Hello,
who knows, where I can find the Roger Fourneaux rear hub nut with lipseal set?
Thanks for your help!

Wolfgang

Drolshagen

Germany
663 Posts

Posted - 30/05/2017 : 08:01:17

Hi,
here..........
http://www.mg-cars.org.uk/imgytr/pdf/madmetrics.pdf

or "GOOGLE" for "Mad Metrics",

Carl
J2 4362
L2 2036

Andrew Fock

Australia
372 Posts

Posted - 31/05/2017 : 12:33:34

Does that fit an N type?

Andrew

NA 0279
PA 1294

Colin Butchers

United Kingdom
1485 Posts

Posted - 01/06/2017 : 11:37:02

Yes. It fits Ps and Ns. Probably Js, Ls and Ks as well. The new nut is 50mm AF so you will need a thumping great socket to tighten it. Also if you are using original hubs, you need to have 1/10" machined off the end of the boss inside the hub where the half-shaft is pressed in to allow clearance for the thicker nut with its oil-seal. Get spare seals, as it is recommended that these should be replaced every 5000 miles. The seals are easy to replace without removing the nut or bearing carrier.

Colin b.

Edited by - Colin Butchers on 01/06/2017 11:38:12

Gerhard Maier

Germany
868 Posts

Posted - 01/06/2017 : 17:42:24

Wolfgang,
I used the method, which is described in:

"Home - Document downloads - Technical - Rear axle - Rear Hub Oilseal"

Gerhard

Otto

Germany
63 Posts

Posted - 02/06/2017 : 07:58:33

Many thanks to Carl and Gerhard!
These information are usefull for a friend of mine in Italy.

Topic

Forum Locked

Topic Locked

Printer Friendly

Jump To:

Triple-M Register

Snitz Forums 2000