Triple M Register
Triple M Register
Home | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Technical Information Forum
 Recommendations for M type pistons
 Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

SV4670

United Kingdom
140 Posts

Posted - 23/07/2018 :  13:46:03  Show Profile
I need a set of new pistons for a M type engine I am putting together. I would welcome recommendations for the best type of piston to use, the engine will be used hard so I am looking for something strong and reliable. The block will be sleeved back to standard size.
Thanks in anticipation

NeilS

United Kingdom
164 Posts

Posted - 25/07/2018 :  13:59:07  Show Profile
I went with forged pistons from Baynton Jones. I had 6mm on the crown to get the compression ratio a bit better. The engine works very nicely. S&V also offer a Cosworth forged piston but B-J was cheaper.

Neil
Go to Top of Page

SV4670

United Kingdom
140 Posts

Posted - 25/07/2018 :  19:59:04  Show Profile
Thanks for the recommendation, I will find out how much BJ are asking for a set.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple M Register © 2003-2019 MGCC Go To Top Of Page
This page was generated in 0.11 seconds. Snitz Forums 2000