Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 Front trunnions		  Forum Locked  Topic Locked
 Printer Friendly
Previous Page
Author Previous Topic Topic Next Topic
Page: of 2

coracle

United Kingdom
1870 Posts
Posted - 14/03/2018 :  14:40:01  Show Profile
Andy, I have sent you a direct E-mail on this subject.
Go to Top of Page

MG Maverick

United Kingdom
1045 Posts
Posted - 14/03/2018 :  15:44:36  Show Profile
Hi Andy, I have replied by email, currently in Cyprus, back to the UK next week on the 23rd. March. Many Thanks.

Chris

J2353
J4129
Go to Top of Page

ANDY KING

United Kingdom
299 Posts
Posted - 14/03/2018 :  15:52:59  Show Profile
Hi Chris,
Your order has been taken, with many thanks for your e-mail confirmation,
Andy
Go to Top of Page

ANDY KING

United Kingdom
299 Posts
Posted - 15/03/2018 :  10:29:03  Show Profile
Pim
Your reply by e-mail has been acknowledged by return, thank you.

Nigel
Your order has been placed and acknowledged by return e-mail, thank you.

Andy
Go to Top of Page

Cymber

United Kingdom
966 Posts
Posted - 15/03/2018 :  21:47:33  Show Profile
I had this problem and my solution was to bore out the box oversize so as to just clean up the unworn lower half and take enough metal out at the top to produce a good bore. I then had to make oversize trunions with slightly offset slots to compensate for the offset bore. It was a long winded process but very satisfying when it turned out OK.

Maurice.
Go to Top of Page
Page: of 2 Previous Topic Topic Next Topic  
Previous Page
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000