Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 Rubber MG Heel Mats
 Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

pconnolly

United Kingdom
59 Posts

Posted - 14/03/2018 :  10:07:34  Show Profile
Does anybody have a couple of the small (approx. 1ft long I think)rectangular MG rubber heel mats that protect the carpet in the footwells? Alternatively does anyone know of a supplier for them out there?
(Soory about the picture quality)





Paul Connolly

bigtony12461

United Kingdom
100 Posts

Posted - 14/03/2018 :  11:01:22  Show Profile
Have a look here.
http://www.triple-mregister.org/forums/topic.asp?TOPIC_ID=13368&SearchTerms=mats

Tony
NA0795
Go to Top of Page

sam christie

United Kingdom
3056 Posts

Posted - 14/03/2018 :  11:04:30  Show Profile
Paul, this subject comes up now and again. Try this one (or search 'heel mats').

http://www.triple-mregister.org/forums/topic.asp?TOPIC_ID=13368&SearchTerms=mats

I am not sure who currently sells these. I pinched this picture from Simon's thread.



If anyone knows where these can be found I would like a couple myself.




Sam
Go to Top of Page

Drolshagen

Germany
662 Posts

Posted - 14/03/2018 :  11:28:24  Show Profile
Hi Paul

Moss Uk and NTG Ipswich stock them

https://www.moss-europe.co.uk/mat-heel-drivers-floorboard-280-995.html

Carl
J2 4362
L2 2036
Go to Top of Page

Simon Johnston

United Kingdom
5999 Posts

Posted - 14/03/2018 :  14:21:14  Show Profile
A simple Google search for 'MG heel mat' brings up Moss, NTG, and, of course, this Forum.

Simon J
J3437
Go to Top of Page

pconnolly

United Kingdom
59 Posts

Posted - 14/03/2018 :  16:42:25  Show Profile
Many thanks everyone for the advice and links. I was hoping to locate the mat with the logo at 90 degrees compared to the T type mats stocked by Moss and NTG but I see from the previous threads it is not just as simple as that!
If I can't find them - (and it doesn't look hopeful!) - I think I'll get the t type mats and cut out and rotate the logo.
Thanks again for all the pointers.


Paul Connolly
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000