Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 General Information
 J2 Pinion setting jig		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Schuyler

USA
11 Posts
Posted - 18/05/2018 :  02:25:41  Show Profile
I am installing a new crown wheel and pinion in my 1932 J2. I've noticed that there are drawings of "Setting Jigs" in both, "MG Road Cars", by Malcolm Green and also in "The J2 Compendium" compiled by George Jarrand. They are different! Anyone know which is correct?

Sky Hoffman
J2648

LewPalmer

USA
3208 Posts
Posted - 18/05/2018 :  04:14:35  Show Profile
Sky,

I have such a gauge, but the setting would depend on what gear set you have. If you need to borrow it, let me know.

Lew Palmer
PA1169, PB0560
Edited by - LewPalmer on 18/05/2018 04:15:01
Go to Top of Page

Schuyler

USA
11 Posts
Posted - 19/05/2018 :  17:44:45  Show Profile
Lew, Thanks for the offer. I've made one as per The J2 Compendium but I found the one in M.G. Road Cars and was surprised they were different. I'll persevere with it. Bluing the gears will indicate how they mesh.

Sky
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000