Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 Second crankcase breather for PA engine		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Elliot B

Australia
24 Posts
Posted - 21/06/2020 :  09:44:45  Show Profile
The engine that is going into my PA is a later two breather unit. The only problem is that while I have the pillar box breather (the common one) I don't have the second breather that fits on the other side of the crank case below the water branch cover plates. Does anyone have one or have details of one so I can try & make one?

While I'm at it I don't have a starter motor either. Does anyone have a spare Lucas M35A?

Elliot Burns
PA 1499

John Hunting

Australia
85 Posts
Posted - 22/06/2020 :  00:57:39  Show Profile
I may be able to help , could you email direct . John
Go to Top of Page

Bruce Sutherland

United Kingdom
1552 Posts
Posted - 22/06/2020 :  21:04:47  Show Profile
Elliot,
One of these breathers?



Hope this helps.

Bruce. (PB0564)
Go to Top of Page

Nick Dean

United Kingdom
440 Posts
Posted - 22/06/2020 :  22:42:18  Show Profile
Elliott. I made my own breather using 3/16th inch plate, then two 3/8th copper pipes side by side into copper right angles and silver soldered them all together. Seems to work fine and looks OK with the pipe bottoms cut just below the sump. All materials from the local plumbers merchants. Good luck, . Nick.

N A Dean
Go to Top of Page

Elliot B

Australia
24 Posts
Posted - 01/08/2020 :  12:44:52  Show Profile
I'm still on the look out for the off side crankcase breather, if anyone has one.


Elliot Burns
PA 1499
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000