Triple-M Register - nose piece for PA radiator shell

Triple-M Register

Username:	Password:
Save Password
Forgot your Password?

All Forums

Triple-M Register Forums

Parts Wanted

nose piece for PA radiator shell

Forum Locked

Topic Locked

Printer Friendly

Author

Topic

Hillebrand

Germany
131 Posts

Posted - 23/06/2021 : 21:45:57

Hi all
I'm looking for a nose piece for the radiator shell of my PA.

otto

davies

United Kingdom
699 Posts

Posted - 25/06/2021 : 09:00:33

is it the same as a T Type? - Rich

Hillebrand

Germany
131 Posts

Posted - 25/06/2021 : 13:23:56

Hi Rich,

I'm not completely sure, but I think so.

Measurements: width is 105 mm

the length as shown in the picture is 115 mm

the angle seen from the side is approx. 23�

Cheers

otto

davies

United Kingdom
699 Posts

Posted - 26/06/2021 : 15:33:46

T Type nose piece was bolted on thru the badge - looks like P type was soldered on? - Rich

Hillebrand

Germany
131 Posts

Posted - 26/06/2021 : 19:24:45

Rich

the pictures are only for measurements. This nose piece came with the car I'm restoring. It's for P-type and was bolted on thru the badge.
The top has been cut out because the radiator cap did not fit.

Regards

otto

g waiting

United Kingdom
720 Posts

Posted - 26/06/2021 : 21:33:26

Hi,
T type nosepiece is 1/4� more front to back than p type. The height is the same. Not much difference but it really matters. Can be altered to suit but is rather nerve wracking.
Garry

Hillebrand

Germany
131 Posts

Posted - 26/06/2021 : 21:55:36

Thank You Garry!

otto

Topic

Forum Locked

Topic Locked

Printer Friendly

Jump To:

Triple-M Register

Snitz Forums 2000