Triple-M Register
Triple-M Register
Home | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Technical Information Forum
 J2 Seat Back Adjustors		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

John M

USA
68 Posts
Posted - 14/06/2012 :  14:28:55  Show Profile
I need to fabricate the wood cross bar and rake adjustors located behind the J2 seat back. Anyone have old original parts they could provide photos or drawings of? How was the wood cross bar attached to the body?

Thanks!

John M.

LewPalmer

USA
2674 Posts
Posted - 14/06/2012 :  15:54:59  Show Profile
John,
There are some pretty good photos and diagrams at http://www.mgmmm.com
Also, there is a photo at http://www.mgmmm.com/type-J-foto%27s.htm
And the wooden seat back support at http://www.mgmmm.com/tekeningen.htm



Lew Palmer
Registrar, NAMMMR
Go to Top of Page

PeterL

United Kingdom
1366 Posts
Posted - 16/06/2012 :  17:49:16  Show Profile
John

The ply inner wings are cut away to take the ends which are held in place by a screw from the outside.

Cheers

P
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2021 MGCC Go To Top Of Page
Snitz Forums 2000