Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Traders' Forum
 Bespoke parts and accessories		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

DDMDSN

New Zealand
329 Posts
Posted - 31/08/2020 :  00:47:25  Show Profile
I have the following bespoke parts available at the moment and planning for parts to work on to complete the year.

Prices and details are on my web site
http://www.ddmdesign.co.nz/pre-war-mg-parts

All parts are made locally or in my workshop

Bronze chrome or nickel plated bat wings emblem for motometer or calormeter *new** made to order
2 x pre-war bronze chrome plated grab handle to be finished to order
3 x tappet spanners with feeler gauge to be finished to order
2 x 1/2" sq. sump plug spanners to be finished to order
2 x complete PB/NB 30 mph warning lights to be finished to order
2 x tool rolls cream/red-brown

Also have had quite a bit of interest over the years about my after-market P Type air cleaner manifold this one I made for the PB when I was about 18 (42 years ago). Push on and bolt no mods needed to fit. Enquiries welcome. Making a batch of 6 late in the year. The badge to be cast in bronze as for grab handle. The body to be laser cut in panel steel.











leckstein

USA
408 Posts
Posted - 31/08/2020 :  11:57:25  Show Profile
Any idea about the probable cost of the air cleaner? I Would be interested.

Mike L
Go to Top of Page

DDMDSN

New Zealand
329 Posts
Posted - 31/08/2020 :  20:29:21  Show Profile
Price will be about USD 250 plus the filter and P&P at cost.
Go to Top of Page

leckstein

USA
408 Posts
Posted - 31/08/2020 :  20:56:07  Show Profile
sounds good ,put me on your list. Do You have access to the filter housing ?

Mike L
Go to Top of Page

Bruce Sutherland

United Kingdom
1542 Posts
Posted - 31/08/2020 :  21:15:28  Show Profile
Donald,
What type/specification of air filter element is the air cleaner housing designed to take?

Modern 'paper element' type or old oiled steel 'wool' type - the former I hope?

Bruce. (PB0564)
Go to Top of Page

DDMDSN

New Zealand
329 Posts
Posted - 01/09/2020 :  06:50:25  Show Profile
Thanks for interest and inquiries.
The air filter itself used is the paper type, originally for Hillman Imp, or will find something similar and build around that. Size and performance just right. I did find a replacement for mine not too long ago.
Donald
PB0759
Go to Top of Page

PMark

USA
155 Posts
Posted - 13/09/2020 :  06:01:21  Show Profile
30 mpn light cost
Go to Top of Page

DDMDSN

New Zealand
329 Posts
Posted - 28/09/2020 :  22:26:10  Show Profile
apologies for delay in answering
the 30mph warning light price is
Lens only USD 115 (GBP 92.50)
Complete unit ready to fit USD 225 (GBP 180)
All parts offered are fully described and pricing in NZD can be seen on my web site
http://www.ddmdesign.co.nz/pre-war-mg-parts
Donald
PB0759
Edited by - DDMDSN on 28/09/2020 22:26:35
Go to Top of Page

DDMDSN

New Zealand
329 Posts
Posted - 01/03/2021 :  20:47:04  Show Profile
P Type Air cleaner manifold in production. Making six, 3 taken so far. Price to be GBP 225 each including the filter, plus P&P. The filter is a B&S 1070 filter designed for sit on motor mowers. The one used in my original was for Hillman Imps, seems no-one has Hillman Imps these days.
Expected ready end of March.
Will be ready to fit straight on over the standard carburettor intakes and with a bracket attached to the top of float chamber (no mods required).
Finish will be 'as new', and the MG badge a bronze casting. Silver soldered fabricated steel construction, body nickel plated. Cannister cermamic gloss black painted.
Edited by - DDMDSN on 01/03/2021 20:52:43
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000