Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 Parts Wanted
 J2 drive shaft to camshaft bevel gears		  Forum Locked  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

briang

United Kingdom
218 Posts
Posted - 23/01/2019 :  16:43:26  Show Profile
Anyone got a TAPER FIT shaft for a J2?

Original setup was a keyed parallel shaft, recent shafts have a taper fit onto the drive yoke below.
Taper fitting is a much better design, but not available at the moment from S & V.




Brian

Richard Hardy

United Kingdom
2138 Posts
Posted - 24/01/2019 :  08:02:11  Show Profile
Hello Brian

When you refer to 'recent' shafts, the taper design was fitted to P type onwards during the 1930s.

Vintage MG Parts.com always carry these shafts in stock although are sold as a matched pair ie tapered pinion with J cam gear.

Hope this helps

Richard

Vintage MG Parts
Edited by - Richard Hardy on 24/01/2019 08:03:30
Go to Top of Page

briang

United Kingdom
218 Posts
Posted - 30/01/2019 :  14:59:30  Show Profile
Thanks for replies, guys, parts on their way to me.

Brian
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked  Topic Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000