Triple-M Register
Triple-M Register
Home | Events | My Files | Policies | Profile | Register for the forum | Active Topics | Subscribers | Search | Locate Subscribers | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Triple-M Register Forums
 General Information
 MG J2 1933 engine re build
 Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Richardbroom

United Kingdom
3 Posts

Posted - 04/03/2014 :  13:34:34  Show Profile
Hi,

I'm based just outside London and currently working on restoring a 1933 J2 MG with my father. We are at the stage where the engine needs re building and although we probably have the skills to do so we thought this could do with an expert. We have all of the components, however i would assume a few may need replacing but on the whole everything should be good to use.

We would like to know if you could recommend a person / company that would be suitable for this type of work. As i'm sure many of you understand from experience you find names here and there but unless you have a recommendation its hard decision to make especially as its such an expensive process.

Any advice would be gratefully appreciated. I hope to hear back soon.

Cheers,

Richard

MG Maverick

United Kingdom
1045 Posts

Posted - 04/03/2014 :  13:53:11  Show Profile
I too will need a recommendation . The only person I would trust down here in the south is Robin Lackford, he has completed stirling work on our MGB.

Chris ( J2353 )

Brighton, East Sussex & Paphos, Cyprus.
Go to Top of Page

PeterL

United Kingdom
1711 Posts

Posted - 04/03/2014 :  14:48:05  Show Profile
Tim Miller down here in Somerset did my J and it goes beautifully.

Unfortunately he is about to start work on my Stiles body so I am not giving out his address, at least, not just yet!

Cheers

P
Go to Top of Page

willis

United Kingdom
100 Posts

Posted - 04/03/2014 :  16:18:28  Show Profile
I am very surprised that Oliver Richardson has not been mentioned. He has rebuilt my engine and it sounds fantastic. He was recommended to myself by a number MMM's. Can't speak to highly!

Ian willis
Go to Top of Page

Richardbroom

United Kingdom
3 Posts

Posted - 04/03/2014 :  17:01:46  Show Profile
Hi Ian
Do you have any contacts for Oliver Richardson?

Thanks,

Go to Top of Page

Robin Hamblett

United Kingdom
533 Posts

Posted - 04/03/2014 :  17:07:32  Show Profile
I echo the recommendation of Oliver Richardson. He built the superb engine in my J2 also. He is always busy but is worth the wait, if you can. Oliver can be contacted on 07810 880818.


Regards


Robin



J2 J3666 & J3 3764
Go to Top of Page

Tim

United Kingdom
68 Posts

Posted - 04/03/2014 :  17:28:22  Show Profile
I'm getting to grips with my late M body frame at the moment and will be doing Peter L's Stiles. Finishing off the rebuild of an Alvis 12/50 engine too so I am happy to talk J2 engines. My waiting list isn't huge so if you want to enjoy this summer ( if it eventually comes) in your MG then give me a call. I'm in South Somerset .
Go to Top of Page

Richardbroom

United Kingdom
3 Posts

Posted - 04/03/2014 :  17:35:08  Show Profile
HI Tim,

Whats your contact information, i tried looking online but couldn't find it?

Go to Top of Page

Tim

United Kingdom
68 Posts

Posted - 04/03/2014 :  18:18:42  Show Profile
Hi Richard, if you tap my name on the post you can mail me via the register or perhaps give me a call on my mobile which is 0790 22 00 444.
Look forward to hearing from you.
Tim.
Go to Top of Page

Mikeyb322

United Kingdom
2 Posts

Posted - 25/07/2023 :  21:05:18  Show Profile
Hi there, conscious that this thread is now a little old, I am looking for a suitable engine rebuild workshop in the South of England that would cater for a J2 complete engine rebuild, any recommendations welcome, many thanks


Mike
Go to Top of Page

Onno

Netherlands
1028 Posts

Posted - 26/07/2023 :  07:02:28  Show Profile
The advice hasn’t changed. Call Oliver

Onno "J,D,M" Könemann
Go to Top of Page

Simon Johnston

United Kingdom
6004 Posts

Posted - 26/07/2023 :  07:38:43  Show Profile
+1

Simon J
J3437
Go to Top of Page

kimber

United Kingdom
1526 Posts

Posted - 26/07/2023 :  07:52:51  Show Profile
quote:
Originally posted by Onno

The advice hasn’t changed. Call Oliver

Onno "J,D,M" Könemann



Agree,
Go to Top of Page

Mikeyb322

United Kingdom
2 Posts

Posted - 27/07/2023 :  14:07:26  Show Profile
thanks all, much appreciated

Mike
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
Triple-M Register © 2003-2024 MGCC Go To Top Of Page
Snitz Forums 2000